NEC Express5800/R120f-1M Przewodnik Konfiguracji Pobierz pdf (Strona 44)

Server Configuration Utility User's Guide

Item Description Default Value *1

Basic Configuration Basic Configuration setting

POST Error Pause Select Enable/Disable of POST Error Pause. Enable

Memory Error *2 Select Halt/Boot of Memory Error. Boot

CLI Setup *2 Select Enable/Disable of CLI Setup. Disable

Standby Power Save *2 Select Enable/Disable of Standby Power Save. Disable

Serial Port A Configuration Serial Port A Configuration setting

Serial Port A Select Enable/Disable of Serial Port A. Enable

Serial A Base I/O Select Base I/O Address of Serial Port A. It

must be different from Serial Port B.

3F8h

Serial A Interrupt Select IRQ of Serial Port A. It must be different

from Serial Port B.

IRQ 4

Serial Port B Configuration Serial Port B Configuration setting

Serial Port B Select Enable/Disable of Serial Port B. Enable

Serial B Base I/O Select Base I/O Address of Serial Port B. It

must be different from Serial Port A.

2F8h

Serial B Interrupt Select IRQ of Serial Port B. It must be different

from Serial Port A.

IRQ 3

Console Redirection Configuration Console Redirection Configuration setting

BIOS Redirection Port Select BIOS Redirection Port. You cannot

select “Disable” Port.

Disabled

Terminal Type Select Terminal Type. VT-100+

Baud Rate Select Baud Rate. 115200

Data Bits Select Data Bits. 8

Stop Bits Select Stop Bits 1

Parity Select Parity. None

Flow Control Select Flow Control. Hardware

RTS/CTS

Continue C.R. after POST Select Enable/Disable of Continue Console

Redirection after POST.

Enable

*1: The value might be different according to the system.

*2: It is not displayed when the system does not support this function.

CHECK:

 This setting item does not exist in Off-line TOOL.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 55 56

Brak uwag

NEC Express5800/R120f-1M Przewodnik Konfiguracji Strona 44