Nec Network Controller uPD98502 Instrukcja Użytkownika Strona 397

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 595
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 396
CHAPTER 7 PCI CONTROLLER
Preliminary User’s Manual S15543EJ1V0UM
397
7.5.11 P_PIMR (PCI Interrupt Mask Register)
PIMR register masks interruptions. A mask bit, which locates in the same bit position to a corresponding bit in
PGSR, can mask the interruption. When a bit of this register is reset to ‘0’, the corresponding bit of the PGSR is
masked. When it is set to ‘1’, the corresponding bit is unmasked. When the mask bit is reset and the bit in PGSR is
set, the PCI Controller sets the interrupt signal to PCI-Host.
R/WBits Field
Internal
bus
PCI
Default Description
31:16 PUINT R/W R/W 0 Mask bits for the Interrupts defined by the system the chip is
used.
‘0’ means masked.
‘1’ means unmasked.
15:11 Reserved - - 0 Hardwired to ‘0’s.
10 IPREQ R/W R/W 0 Mask bit for the state transition for PPMI.
‘0’ means masked.
‘1’ means unmasked.
9 SWRDN R/W R/W 0 Mask bit for Software Reset done.
‘0’ means masked.
‘1’ means unmasked.
8 DPERR R/W R/W 0 Mask bit for Detected Parity Error.
‘0’ means masked.
‘1’ means unmasked.
7 SSERR R/W R/W 0 Mask bit for Signaled SERR_B.
‘0’ means masked.
‘1’ means unmasked.
6 RMABT R/W R/W 0 Mask bit for Received Master Abort.
‘0’ means masked.
‘1’ means unmasked.
5 RTABT R/W R/W 0 Mask bit for Received Target Abort.
‘0’ means masked.
‘1’ means unmasked.
4 STABT R/W R/W 0 Mask bit for Signaled Target Abort.
‘0’ means masked.
‘1’ means unmasked.
3 PFDSC R/W R/W 0 Mask bit for the discard of data in PCI FIFO.
‘0’ means masked.
‘1’ means unmasked.
2 RTYTE R/W R/W 0 Mask bit for Retry Timer Expired.
‘0’ means masked.
‘1’ means unmasked.
1 PRBER R/W R/W 0 Mask bit for internal bus Error in read transaction.
‘0’ means masked.
‘1’ means unmasked.
0 PWBER R/W R/W 0 Mask bit for internal bus Error in write transaction.
‘0’ means masked.
‘1’ means unmasked.
Przeglądanie stron 396
1 2 ... 392 393 394 395 396 397 398 399 400 401 402 ... 594 595

Komentarze do niniejszej Instrukcji

Brak uwag