NEC Display Wall Calibrator Podręcznik Użytkownika Pobierz pdf (Strona 24)

24 | NEC DISPLAY WALL CALIBRATOR - USER’S GUIDE

Example: Single IP LAN with daisy-chained RS232

Supported display connection congurations

RS-232C

OUT

LAN

RS-232C IN, OUT, and LAN

In this example, the host PC is connected to the rst display via LAN. Subsequent displays are connected together using

RS232 daisy-chaining. Each display on a daisy-chain must have a unique MONITOR ID.

Important: The rst display is congured to use LAN as the EXTERNAL CONTROL on the OSD. The other displays are

congured to use RS232 as the EXTERNAL CONTROL on the OSD. The RS232 OUT on the rst display is connected to the

RS232 IN on the next display.

Since communications to all of the displays is routed through the rst display, the software uses only the IP address of

the rst display. The rst display then translates commands received via LAN to the RS232 OUT to be received by the

other displays in the video wall.

LAN

RS232 OUT

RS232 IN

RS232 OUT

RS232 IN

RS232 OUT

RS232 IN

ID 1

LAN

IP 192.168.0.1

Display 1

ID 2

RS232

Display 2

ID 3

RS232

Display 3

ID 4

RS232

Display 4

IP 192.168.0.200

LAN

The following image shows how this layout looks in the Summary window when congured. Notice that all of the

displays are congured in the software to use the LAN IP address 192.168.0.1, even though displays 2, 3, and 4 are

connected together via RS232.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 91 92

Brak uwag

NEC Display Wall Calibrator Podręcznik Użytkownika Strona 24