NEC Display Wall Calibrator Podręcznik Użytkownika Pobierz pdf (Strona 38)

38 | NEC DISPLAY WALL CALIBRATOR - USER’S GUIDE

not be necessary to perform the Measurement step.

The following table shows some example typical calibration times for various sized video walls:

Wall Size Measurement Time

(minutes)

Calibration Time

(minutes)

Total Time

(minutes)

2x2 2 16 18

4x4 8 32 40

5x5 12.5 50 62.5

6x6 18 72 90

Note: When measuring and calibrating the video wall, the software will automatically move to the next display once the current

display has been completed. The next display will be indicated by the screen on that display ashing alternating green and

red. The software will wait until the color sensor has been placed on the display screen before automatically proceeding with

the measurement or calibration process.

Video Inputs

Each video input can have its own settings for various controls, such as Brightness, Gamma Selection, Picture Mode

etc.

During calibration the settings for the currently selected video input are automatically congured. However if other

video inputs are going to be used as well with the video wall, then the settings for those inputs will need to be correctly

congured to use the calibrated settings.

After calibration, use the Calibration tab on the Display Settings dialog to apply the calibration settings to other video

inputs.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 91 92

Brak uwag

NEC Display Wall Calibrator Podręcznik Użytkownika Strona 38