NEC PD17062 Instrukcja Użytkownika Pobierz pdf (Strona 152)

152

PD17062

In reality, however, to avoid skipping the timer process in the above example, a delay is provided between

the negative-going edge of the timer carry FF set pulse and the negative-going edge of the timer interrupt

pulse, as shown in Fig. 12-10 (b).

As shown at (2) in Fig. 12-10, restricting the clock process to within 10 ms can eliminate skipping of a timer

interrupt that would otherwise be caused by a CE reset.

Fig. 12-10 Timing Chart

(a)

(b)

CE pin

Timer carry FF set pulse

Timer interrupt pulse

Timer interrupt Because the timer carry FF set

pulse goes high, a CE reset occurs

here, thus skipping detection

of a timer interrupt once.

CE pin

Timer carry FF set pulse

Timer interrupt pulse

Timer interrupt

Delay; 10 ms in this case

CE reset

Because there is a delay of 10

ms between the negative-going

edge of the timer interrupt pulse

and the positive-going edge of

the timer carry FF set pulse, a CE

reset does not hamper the

normal timer processing,

provided that the timer interrupt

handling is finished within 10 ms.

1 2 ... 147 148 149 150 151 152 153 154 155 156 157 ... 295 296

Brak uwag

NEC PD17062 Instrukcja Użytkownika Strona 152