NEC Express5800/R110f-1E Instrukcja Konfiguracji Pobierz pdf (Strona 123)

NEC ESMPRO Manager Setup Guide

122

This section explains the functional difference and notes of each managed component.

If note number for the managed component is displayed on the column "notes" of "Managed Components

List", refer the notes of the note number.

1. About the connection type or the connection port.

1-(a) Remote management with modem connection is not supported for this product.

1-(b) Remote management with direct connection is not supported for this product.

1-(c) Modem connection with the NEC ESMPRO Manager is available with the serial port 2 on the rear

panel of the managed component.

1-(d) Direct connection with the NEC ESMPRO Manager is available with the serial port 2 on the front

panel or rear panel.

1-(e) Direct connection with the NEC ESMPRO Manager is available with the serial port 2 on the front

panel.

1-(f) To enable remote management via direct connection, use the RS-232C cross cable that is specified on

the users guide attached with the managed component.

1-(g) BMC on this managed component has the function that is equal to the Advanced Remote

Management Card. The BMC has also a dedicated LAN port. NEC ESMPRO Manager operates as

Advanced

Remote Management Card is contained. And when you refer online help of NEC ESMPRO Manager

for this managed component, please do not see the explanation about the managed component which

contains standard BMC but about the managed component which contains the Advanced Remote

Management Card.

2. About function

2-(a) This product may not be able to boot the remote FD correctly depending on the memory size required

for the operating system or application.

2-(b) This product has no function to identify the chassis like UID lamp, however "Identify Chassis"

command of the NEC ESMPRO Manager is executer successfully.

2-(c) BMC on this managed component has the function that is equal to the Advanced Remote Management

Card. The BMC has also a dedicated LAN port. NEC ESMPRO Manager operates as Advanced

Remote Management Card is contained. And when you refer online help of NEC ESMPRO Manager

for this managed component, please do not see the explanation about the managed component which

contains standard BMC but about the managed component which contains the Advanced Remote

Management Card

2-(d) This product does not support remote console function.

2-(e) NEC ESMPRO Agent Extension or NEC DianaScope Agent cannot be installed on this product.

Some functions of NEC ESMPRO Manager are not supported for the product if the functions need to

communicate with NEC ESMPRO Agent Extension or NEC DianaScope Agent.

2-(f) BMC on this product cannot be configured using either NEC ESMPRO Agent Extension, NEC

DianaScope Agent or NEC ESMPRO Manager PXE Service. Please refer to the user's guide that is

attached in this product for BMC configuration.

2-(g) If NEC ESMPRO Manager server is on Linux, Remote Console function of NEC ESMPRO Manager

can't communicate with this product. Remote Console is not supported for this product.

2-(h) Enclosure ID or slot ID of this product (Blade server) can't be obtained from NEC ESMPRO

Manager.

2-(i) There are notes for the force network-boot function.

N-code of the managed component is [N8400-025F] or [N8400-026F] and the BIOS Revision is

6.1.0010 and below, please contact our local representative to acquire the fixed module.

2-(j) This product does not support power off, power cycle and reset from NEC ESMPRO Manager.

However, power off and power cycle can be executed by NEC ESMPRO Manager command line

interface in case of emergency.

2-(k) This product does not support to shutdown OS from NEC ESMPRO Manager with modem/direct

connection.

1 2 ... 118 119 120 121 122 123 124 125

Komentarze do niniejszej Instrukcji

Brak uwag

NEC Express5800/R110f-1E Instrukcja Konfiguracji Strona 123

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Bramy / kontrolery NEC Express5800/R110f-1E