NEC Express5800/R110f-1E Instrukcja Konfiguracji Pobierz pdf (Strona 28)

NEC ESMPRO Manager Setup Guide

SNMP Community

Name(Get)

SNMP Community Name which is specified at SNMP Agent running on

the managed component.

It is necessary to get the information, configure, monitor via SNMP

SNMP Community

Name(Set)

When you want to set SNMP Community names for Get and Set

separately on the managed component, specify the SNMP Community

name for Set in this field by alphanumeric characters.

If it is not specified, SNMP Community name for Get will be used.

User Name Enter the user name for communication with WS-Man service.

The account must be a system administrator of the managed operating

system.

Password Enter the password for communication with WS-Man service.

Communication

Protocol

Select protocol HTTP/HTTPS for connection WS-Man service. *2

Port Number Enter port number where WS-Man service listens for connection. *3

RAID system management

Management Select "Registration" to manage the RAID system of the component.

If the operating system of the managed component is VMware ESXi5,

WS-Man management must be enabled in addition to this setting.

NEC ExpressUpdate

Updates via NEC

ExpressUpdate Agent

Select "Registration" to manage the component using NEC

ExpressUpdate.

Updates via

Management Controller

Select "Registration" to manage the component using Management

Controller

BMC (EXPRESSSCOPE Engine)/ vPro (Common)

Management Select "Registration" otherwise NEC ESMPRO Manager may not monitor

HW status.

Management Type Select "BMC".

Authentication Key Enter the "authentication key" that you set in “1.2 Configure BMC on

Managed Component”.

BMC (EXPRESSSCOPE Engine)/ vPro (LAN)

Current IP Address If you set both “IP Address1” and “IP Address2”, specify which IP address

you want to use for connection.

Failover This setting is valid only when both “IP Address1” and “IP Address2” are

set. Determine whether to enable/disable the “Failover” feature.

IP Address 1 Enter the IP address that is specified on LAN1 of the BMC configuration

for the managed component.

If the managed component is a fault tolerant server, you should enter the

IP address of the management LAN port for the CPU/IO module 0 to the

form.

If the managed component is a server which has EXPRESSSCOPE

Engine SP3(2BMC model), you should enter the IP address of the

management LAN port for the Master BMC to the form.

Subnet Mask1 Enter the subnet mask that is specified on LAN1 of the BMC

configuration for the managed component.

If the managed component is a fault tolerant server, you should enter the

subnet mask of the management LAN port for the CPU/IO module 0 to

the form.

If the managed component is a server which has EXPRESSSCOPE

Engine SP3(2BMC model), you should enter the subnet mask of the

management LAN port for the Master BMC to the form.

IP Address 2 Enter the IP address that is specified on LAN2 of the BMC configuration

for the managed component.

If the managed component is a fault tolerant server, you should enter the

IP address of the management LAN port for the CPU/IO module 1 to the

form.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 124 125

Komentarze do niniejszej Instrukcji

Brak uwag

NEC Express5800/R110f-1E Instrukcja Konfiguracji Strona 28

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Bramy / kontrolery NEC Express5800/R110f-1E